Accessories

COMPONENTS Accessories and components giving you chance to improve your enclosures abilities.

Subcategories

Knurled Plastic-Head Thumb Screws

Altınkaya Enclosures manufactures also knurled plastic-headed screws which are a sort of washer-faced knurled thumb screws with a slotted drive in the screws head from our broad variety of thumbscrews. The plastic thumb screw's head is designed to make spinning with one hand easier.

They're a great choice for assemblies with often changing components, such as access panels. Because of the manual action, knurled thumbscrews are essential and can be utilized in a variety of industrial applications, heavy-duty enclosures, instrument enclosures. Thread sizes M4, M5, M6, and M8 are available.

- Available off the shelf in M4, M5, M6, and M8 diameters, various lengths, and black and white color options.

- ABS plastic screw heads are available with various options.

Multi Hole Seals for Cable Glands

Multi Hole Seals for Cable Gland Seals

- Can be used in applications where more than one non-terminated cable or wire must be placed into the same cutout.

- After removing the original internal rubber seal, you can use the seals below with standard industrial domed glands by ITC (nylon or metal, brass).

- For cable gland applications and IP-rated applications, multi-hole seals are available.

- The cable glands and multihole seals are available separately.

- IP 68 5 bar Protection Class.

- -30°C to + 100°C permanent operational temperature.

- +150°C short-term maximum operational temperature.

- Thermoplastic Vulcanized TPV Seal.

Screws

Plastic Screws and Nuts

- Our polyacetal plastic screws and nuts are available in M3 size.

- Available in white and lengths of 6,8,10,12, and 16mm.

Screws and Nuts

- Our stainless steel screws and nuts are available in different diameters and lengths to suit various fields.

Cable Grommets

Sleeved Cable Grommet

- Our sleeved cable grommets are available from 2x0.75mm to 10mm in different sizes.

- The grommets, which are produced from PVC and TPE material, have black, light gray, and white color options.

- They are available off the shelf with 100 units per pack.

- Resilient sleeved cable grommets

- Elastic grommets are bendable up to 90 degrees

- Protecting the cables inside from damage, smash caused by twisting

- Produced by TPE and PVC material and packed 100 pieces

- Starting from 2x0.75mm size to 10mm dia with different lengths

- Wall thickness for the application placed between 2-3mm

Strain Relief Bushing

- Our strain relief bushings which are available in 2 different sizes are produced with PA66 material.

- Stock color is black.

- The size options are 6mm and 7mm.

- The strain relief bushing fastens and protects cables and wires securely.

- The bushings practically capture the cable or the wire and easily fold over it.

- Eliminates the difficulties of cable or wire installation in difficult application areas.

- Also allows easy disassembly.

- Wall thickness for the application placed between 1-2mm.

Cable Grommet

- Cable grommets are the rings that cables or wires pass through.

- A cable grommet is inserted in holes to protect the cables from certain materials or other external effects.

- Used to seal cables and similar products.

- 7 different sizes and 2 main colors, black and white, are available.

- Protects cables, wires, and tubing from sharp metal edges.

- Products come in packs of 50 or 100 pieces.

Snap-Fit Bushing

- Snap-fit cable bushings protect cables, wires, and tubing from sharp metal edges.

- Fingertip pressure for installation on 20mm diameter holes.

- Flanged front side and claws on the other part of the bushings keep it fixed in the operation area.

Quick-Fit Grommet

- Our TPE grommets are suitable for 6.5 and 7mm diameter cables.

- Available in standard black.

- Quick-fit grommets are seals for cables, pipes, and tubing.

- Use a little fingertip pressure for installation and push back to disassemble.

- Protects cables, tubes, and pipes from sharp metal edges.

- Manufactured from high-quality TPE material.

- Pack of 250 quick-fit grommets.

Multi-Hole Cable Grommet

- Multiple holes allow easy insertion and sealing of several cables into one gland or cord grip.

- Many types of hole options in one grommet. Get in touch with us and we will help you choose the right one for your applications.

- Manufactured from TPV.

Self-Clinching Fasteners

- Used as fasteners on metal and aluminum surfaces.

- Provide reliable threads and smooth surfaces on metal and aluminum enclosures.

- Clinching into a plain and round hole.

- High pushout and torque-out resistance.

- M3, M4, and M5 nuts, screws, opened and closed standoffs.

Studs

Nuts

Blind Stand-offs

Thru-Hole Stand offs

Brass Inserts

- There are two types of threaded inserts for plastics: molded-in and press-in types.

- They are used for projects that require assembly and disassembly multiple times.

- For robust, reusable, and reliable use in plastic enclosures.

- Molded-in inserts are applied during the molding process. By placing them in the mold cavity with core pins.

When the mold opens, the core pins leave the molded-in inserts permanently embedded in the enclosures.

- Press-in insert applied after the molding process. Easy installation into the drilled holes.

Screws-

Cable Glands

- Cable glands are cable entry devices designed to attach and secure the end of a cable to the enclosure.

- With different types and different sizes, cable glands can be used with any application.

- We have plastic and brass cable glands, spiral plastic cable glands, and plastic blind stops in our store.

Standard Plastic Cable Glands (Metric) and Standard Plastic Cable Glands (PG)

- Cable glands are manufactured with PA6 V2 material.

- Known as a cord grip, cable connector, cable fitting, and cable strain relief in the U.S.

- Available with Metric and PG thread options.

- Plastic and nickel-plated cable glands with a wide range of dimensions.

- Connection thread to DIN EN 60423 standard.

- Manufactured to DIN EN 50262 standard.

- Anti-vibration protection and UV resistance.

- Easy to assemble.

- Halogen Free.

Nickel Plated Brass Cable Gland (Metric) and Nickel Plated Brass Cable Gland (PG)

- Cable glands are nickel-plated brass.

- There are PG and Metric thread options.

- Manufactured according to DIN 40430 standards.

- Provides IP-68 protection at a 5-bar level.

- Temperature range between -40°C and +100°C.

- Thermoplastic vulcanized TPV gasket and nitrile rubber o-ring are available.

Spiral Plastic Cable Glands (Metric) and Spiral Plastic Cable Glands (PG)

- Produced according to DIN EN 60423 standards with PA6 V2 material.

- IP 68 5-bar Protection class.

- Permanent operational temperature is between -30°C to + 100°C .

- Available in 3 different colors: RAL 7001 (Gray), RAL 7035 (Light Gray), and RAL 9005 (Black).

- Thermoplastic vulcanized TPV gasket is available.

- Available off the shelf with Metric and PG thread options.

- Minimizes the damage and avoids the breaking of cables with its flexible spirals.

Blind Stops

- Manufactured according to DIN EN 60423 standards with PA6 V2 material

- Provides IP-54 protection.

- Temperature resistance between -30°C and + 100°C in short-term heatings.

- Available off the shelf in 3 different colors: Light Gray, Black, and Dark Gray.

- PG and Metric thread options are available.

Handles

- We offer many box-carrying handles and other types for various applications.

- A-330 box connection parts are plastic with an aluminum handle. The arm lengths are standard but can vary depending on the quantity ordered.

- A-332 carrying handle is made of ABS and can be mounted in any environment you desire.

- The handle, which has a modern design, is comfortable and suitable for carrying heavy loads.

- Adds an aesthetic appearance to the black cube with screw plugs in different colors.

- A recessed plastic handle is designed for A-370 metal and aluminum cans.

- Thanks to its 4 claws, it stays put until you want to remove it.

- A-314, A-320, A-322, and A-324 rounded corner handles are made to fit Rack Enclosure sizes.

- Tapped screw holes in the stainless nickel plating allow smooth and easy mounting.

- Flexible metal and plastic-coated carrying handles come in lengths of 132mm and 185mm.

- It allows you to carry a heavy load with 2 screws at the ends and it can be flexed after grasping.

- The mechanism fits inside and you can lift the box with precision.

- Produced for plastic and aluminum project boxes with both feet and carrying handles.

- With the DT-320-TK, you can tilt your product and carry it by folding it.

Battery Holders

BATTERY HOLDERS If you need a power source in your project we offer you different types of battery holders for all size of batteries. Also you can find PCB solderable holders or battery contacts and external battery holders in our list.

Button Caps

- Switch caps are used in DIN panels and DIN rail enclosures.

- For pressing the buttons on the PCB. Available in light gray, dark gray, black, and red.

- Can be used in various panel models.

- Made of ABS.

- Our range includes large and small triangular, rectangular, and round shapes.

Card Rails

- Allows easy mounting of PCBs on the enclosures without card rails.

- Screws onto the enclosure to hold the PCB firmly in place.

- Made of ABS.

Terminals

- Used to connect PCBs to the panel.

- Conductive characteristics of terminals are important.

- Various types are available for different models.

- Can be supplied separately.

- A-70 is compatible with RT-110.

- A-72 is compatible with PT-180 and PT-270, used in pack panels of these two models.

- A-75 is compatible with RT-120.

- A-140 is used with RT-110.

- A-144 is used with RT-115.

- A-146 is used with RT-125.

Standoffs

PCB Support Pillar

- The standard snap-lock bracket is ideal for quick assembly in PCB stacking applications, and the quarter-turn fastening aids ease of application.

- PCB support pillars enable a printed circuit board (PCB) to become both insulated and secure by allowing it to be mounted within a range of different electronic assemblies.

- YP-800 model has different sizes ranging from 5 to 22mm in length

- Dual locking support pillar YP-1132 has a double side mounting clip

Brass Standoffs

- Our brass standoffs are nickel plated.

- We have male-female, female-female models in many diameters, and male-male type products in m4 sizes.

- The male side has a standard length of 6mm.

- Available in various lengths.

- Special sizes can be produced to suit specific needs and conditions.

Plastic Spacers

- Plastic spacers are made of Polyamide66.

- Available in a wide variety of sizes, with internal dimensions of 2.5, 3, 4, 5, 6, and 8mm

- The YP-800, with a spring-loaded extension, offers the advantage of easy mounting on PCBs.

Enclosure Feet

Rubber feet protect benchtops, provide friction to avoid slipping, dampen sound, and improve the overall appearance of your enclosure. We have versions that fit in industrial environments, as well as housings and electrical boxes for desktop computers. Consider the size, weight, and interior space while making your decision. Some rubber foot variants have a metal washer that protects the enclosure feet while screwing them in place. Check to see if the rubber feet models are push-in or screw-in.

Tilt feet, which Altınkaya manufactures in-house, also have a selection of tilt foot bars for small plastic enclosures, instrument enclosures, heavy-duty housings, and laboratory cases that can be installed anywhere on the base and provide an ergonomic viewing posture.

- Many types of enclosure feet are available, including rubber, snap-in, screw-mounted, and sloping.

- A-951 and A-952 tilting feet are our top models. They give the enclosure an elegant look.

- They protect the enclosure by keeping it clear of surfaces.

- Feet are available off the shelf for daily shipments in batches of 50, 100, and 150 pieces.

Knobs

- Adjustment knobs can easily be mounted through the inserts inside.

- Lets you set up your projects with the trimpot bar made for your trimpets.

- Products are available in various colors.

- Provides an aesthetic appearance to fit the environment.

Miscellaneous Accessories

Heatsink

- The heatsink fits standard 80mm fans and is made of aluminum.

- It is mounted on the fan and is used to extend its life during intense work.

- Easy to install, lightweight.

Case Separators

- Used for separating the materials inside the enclosure.

- Two different types in our range, one for 4 compartments, the other 6 compartments.

- Made of ABS plastic.

Ventilation Kits

- Ventilation kits can be mounted on any enclosure.

- Creates an aesthetic appearance in applications that require additional ventilation.

- The PH-100 is made of ABS plastic and is used with a seal for water protection.

- A-310 ventilation grill, made of ABS, can be mounted easily with its 4 screw holes

- Illustrations of the different models are available on the website

Led Light Pipes

- LED pipes are used for reflecting the lights on the PCB, inside the enclosure.

- Different lengths and models are available.

- Our range includes dome-shaped, single, and double-leg LEDs.

- Made of PMMA acrylic material.

- With 6 different LED Bars and various sizes in each group, allows you to control the light in your LED projects.

Enclosure mounting kits

Wall mounting kits for your enclosure such as flange kits, mounting kits, and surface mounting brackets are available off-the-shelf, all made to Altinkaya’s high-quality standards. Mounting kits are attached to the enclosure's base and offer a stable mounting location for your box. Aluminum, steel, ABS, and PC plastic mounting kits are all available.

Pole mounting kits are offered for your IP67 hinged plastic cases. The pole mounting brackets enable a stable mounting option using poles. Mast mounting brackets are available in different sizes.

A DIN rail makes it easy to install and replace terminal blocks and other devices. DIN rails are manufactured from steel or aluminum and come in a variety of lengths that meet international requirements. DIN rail brackets, whether straight or angled, tilted and/or raised rails offer easy wiring. For easy installation on 35mm DIN rails, small electronics are connected to mounting clips. Plastic and steel DIN rail brackets allow devices and electronics to be mounted on DIN rails.

Panel mounting fixing clamps are used on the back of the control panel, while the screw clamp is put on the enclosure. The enclosure will be firmly pushed against the control panel's wall when the included screw is used.

Latches and Hinges

- Draw latches from Altınkaya provide a wide choice of options for securely locking panels, plastic cases, and electronics enclosures.

- Altınkaya draw latches offer a mechanical benefit to generate the forces required to compress gaskets, seal enclosures, and prevent rattle.

- They are available in a variety of dimensions including over-center, adjustable, and heavy-duty.

- The latches are made from versatile and long-lasting stainless steel which increases the quality of your project.

- Plastic and steel hinges for enclosures allow doors and lids to open and close by attaching them to cases or surfaces.

- When the electronics cases do not have a hinge option, Altınkaya plastic and steel hinges can be used to attach random enclosures, covers, and bodies.

- CNC customization may require drilling holes to mount a hinge on the enclosure body and lid, but plastic enclosure hinges have a seal option that preserves an enclosure’s IP67 rating.

- Stainless steel hinges have high durability and offer long-lasting use for your enclosures.

- The plastic hinges are made from ABS which is rigid and light.

RF shields

RF SHIELDS RF shields block radio frequency electromagnetic radiation and by this way help protecting your device. We have different sizes of RF shields, select one of them or ask us to produce your custom size.

Mounting Plates

Sort by:

View

There are 392 products.

PA-120

Meter Inspection Window Glass Small

€1.09

View View details

PA-130

Meter Inspection Window Glass Large

€1.46

View View details

PA-220

€1.46

View View details

PCB card guide line A-921

PCB card guides are vertical and horizontally mounted card guides that are used to handle insert extracting difficulties for printed circuit boards.

€0.48

View View details

PCB card guide line A-922

Plastic Card Rail ( 2 Rails ). Card rails are application accessories made of ABS UL-94 material that are used to align a board when it is put into a card rack.

€0.74

View View details

PCB card guide line A-923

4,5" Plastic Card Rail. The PCB (printed circuit board) card rail line is made of plastic and allows for easy and quick assembly.

€0.69

View View details

PCB pillar A-124

Insulating Washer (4 mm)

€10.45

View View details

PCB pillar A-126

Insulating Washer (6 mm)

€8.38

View View details

PCB support pillars YP-800

PCB support pillars enable a printed circuit board (PCB) become both insulated and secure by allowing it to be mounted within a range of different electronic assemblies.

€6.72

View View details

PH-100

ABS Plastic Ventilation Enclosure.

€3.85

View View details

PN-300

M3 Plastic Nut

€12.50

View View details

PS-306

M3x6 mm Plastic Screw

€8.70

View View details

PS-308

M3x8 mm Plastic Screw

€8.70

View View details

PS-310

M3x10 mm Plastic Screw

€8.70

View View details

PS-312

M3x12 mm Plastic Screw

€8.70

View View details

PS-316

M3x16 mm Plastic Screw

€6.96

View View details

Panel Mounted Enclosure Fixing Clamp A-47

Panel mounted plastic material fixing clamp accessory for fastening electronic enclosure boxes to keep stable and safe.

€15.46

View View details

Panel Mounted Enclosure Fixing Clamp A-52

For fastening electronic enclosure boxes to ensure products are working efficiently, panel-mounted type steel material fixing clamp equipment can be used.

€10.73

View View details

Panel Mounted Enclosure Fixing Clamp A-53

As securing electronic enclosure boxes to have a longer lifespan, Panel mounted enclosure fixing clamp accessories have been produced with strong plastic material.

€4.25

View View details

Panel Mounted Enclosure Fixing Clamp A-54

Panel mounted type plastic material are produced from strong structured plastic material, that fixing clamp accessory is for fastening electronic enclosure boxes to have stable projects.

€2.86

View View details

Showing 261-280 of 392 item(s)

Filter by

Categories

Accessories

PA-120

PA-130

PA-220

PCB card guide line A-921

PCB card guide line A-922

PCB card guide line A-923

PCB pillar A-124

PCB pillar A-126

PCB support pillars YP-800

PH-100

PN-300

PS-306

PS-308

PS-310

PS-312

PS-316

Panel Mounted Enclosure Fixing Clamp A-47

Panel Mounted Enclosure Fixing Clamp A-52

Panel Mounted Enclosure Fixing Clamp A-53

Panel Mounted Enclosure Fixing Clamp A-54